This is a super easy project, which will make you feel that you have made yourself a favor by keeping your money in your wallet, while picking up a simple skill. From start to finish should take you less than an hour-no more than a two-beer jobs (if you are thirsty). This was done on my 2003 A6 2.7 t. I know in previous years had the coil packs that were bolted in. not sure what other differences apply. Assemble the instruments of your affair. For this task, we will have to use a flat head screwdriver and one main a 3/8 inch flex-handle ratchet with 18 5?. User head screwdriver, remove the two screws on top of the air intake/insider knowledge. When the screws are removed, dragging on for the scoop. After removal of the scoop, remove plastic neck by pulling up on the end closest to the airbox (end will release easily from a clip) and then sliding the neck backward and up open clips keeps hoses. on top of the airbox. There are two of them from the clip on Remote conduits, fender-top side of the airbox. This guide provides step-by-step procedures, complete with artwork.
Download replacement Guide